CA-1000
2
ni.com
What You Need to Get Started
You need the following items to set up and use your CA-1000 enclosure:
❑
CA-1000 Configurable Connector Accessory Enclosure Installation
Guide
❑
CA-1000 enclosure
❑
CA-1000 hardware
–
Panelette label sheet
–
Rubber feet kit
•
Four rubber feet
•
Four 4-40 panhead shoulder screws with 0.08 in. shoulder
length and 0.125 in. thread length
–
Filler panel and standoff kit
•
Four black blank filler panels
•
Two silver 68-pin filler panels
•
Ten 4-40
×
3/16 in. black flathead screws
•
Four 4-40
×
1/2 in. female to female nylon standoffs
❑
National Instruments supplied screwdriver
❑
Rack-mount kit (optional)
❑
Stack-mount kit (optional)
❑
One of the following internal accessories:
–
SC-2040
–
SC-2042-RTD
–
SC-2043-SG
–
SC-2070
–
SC-2071
–
SC-2072
–
CB-50LP
Note
The above internal accessories require an R50M-50F ribbon cable to make a 50-pin
external connection. They require a 68M-50F MIO Bulkhead Ribbon Cable to make a
68-pin external connection.
–
CB-68LPR
–
SCB-68
Summary of Contents for CA-1000
Page 1: ...SC 2042 RTD...