![background image](http://html1.mh-extra.com/html/national-instruments/ca-1000/ca-1000_installation-manual_3396790020.webp)
©
National Instruments Corporation
19
CA-1000
Refer to Figure 14 and use the following steps to install the CA-1000
stack-mount kit on your CA-1000 enclosure:
1.
Attach the stack-mount brackets to both ends of the lower enclosure
with the 4-40
×
1/4 in. flathead screws provided with the stack-mount
kit.
2.
Place the upper enclosure on top of the lower enclosure.
3.
Attach the stack-mount brackets to both ends of the upper enclosure
with the 4-40
×
1/4 in. flathead screws provided with the stack-mount
kit.
Note
You must remove the rubber feet from all but the bottom enclosure before stacking
them.
You can stack additional enclosures by using additional stack-mount kits.
The stack-mount kit handles can be removed, if necessary, by removing two screws.
Figure 14.
CA-1000 Stack-Mount Kit
1
4-40
×
1/4 in. Screws
2
Stack-Mount Brackets
1
2
1
1
2
1
Summary of Contents for CA-1000
Page 1: ...SC 2042 RTD...