National Instruments Corporation SC-207 Series User Manual Download Page 42 | Manualshive

Page: 42 / 91

background image

© National Instruments Corporation

3-1

SC-207X Series User Manual

Chapter 3
SC-2071 Board

This chapter describes the SC-2071 board in detail, including function, compatibility,
connection, mounting, and applications. This chapter also discusses working with
thermocouples.

The SC-2071 is a general-purpose termination breadboard that makes it easy to connect to all
Lab/1200 device I/O signals; add analog input signal conditioning, such as filters, dividers, and
thermocouple compensation; and build external, custom timing, analog, and digital circuits.

The SC-2071 board is used with the National Instruments Lab/1200 devices for the Macintosh,
IBM PC/XT/AT, and compatible computers.

The SC-2071 board has screw terminals for eight single-ended input channels. Open component
positions at each analog input facilitate the addition of user-selected signal conditioning. The
SC-2071 board has an onboard temperature sensor that can be optionally jumpered to channel 0
for thermocouple cold-junction compensation. With open component positions in the input
paths, you can insert user-supplied resistors and capacitors for conditioning the eight single-
ended analog input signals. A 4 by 1.5 in. general-purpose breadboard area is also included.
The SC-2071 board also has screw terminals for all of the other signals from the DAQ device.
With these terminals, the board easily connects to digital, timing, and trigger signals. The
SC-2071 has two 50-pin I/O connectors, J1 and J2. Connector J2 is designated for daisy-
chaining DAQ signals. Figure 3-1 shows the parts locator diagram for the SC-2071 board.

«
...
40
41
42
43
44
...
»

Summary of Contents for SC-207 Series




























































































Reviews:

No comments

Related manuals for SC-207 Series

Brand: ZALMAN Pages: 20

Brand: B2 Pages: 52

NI WLS/ENET-9163

Brand: National Instruments Pages: 36

Brand: Cervoz Pages: 22

Quadro M6000 Sync

Brand: Nvidia Pages: 8

SiliconDrive SSD-P16G(I)-3100

Brand: Silicon Systems Pages: 108

Brand: XJTAG Pages: 9

Brand: Xilinx Pages: 8

Brand: DigiTech Pages: 6

Brand: IBM Pages: 72

Brand: Xtreme Pages: 83

Brand: Vacron Pages: 16

NVR2104/2108HS-W-4KS2 1U

Brand: Dahua Technology Pages: 363

Brand: OWC Pages: 9

Vortex86SX VSX-6101

Brand: ICOP Technology Pages: 50

USB device 622x

Brand: National Instruments Pages: 23

Brand: Enterasys Pages: 808

Brand: StarTech.com Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands