National Instruments Corporation SC-207 Series User Manual Download Page 18 | Manualshive

Page: 18 / 91

background image

© National Instruments Corporation

2-1

SC-207X Series User Manual

Chapter 2
SC-2070 Board

This chapter describes the SC-2070 board in detail, including function, compatibility, connection,
mounting, and applications. This chapter also discusses working with thermocouples.

The SC-2070 is a general-purpose termination breadboard that makes it easy to connect to all MIO-16
board I/O signals; add analog input signal conditioning, such as filters, dividers, and thermocouple
compensation; and build external, custom timing, analog, and digital circuits.

The SC-2070 board is used with National Instruments DAQ boards for the Macintosh (NB Series),
IBM PS/2 Micro Channel (MC Series), and PC/XT/AT and compatible (AT Series) computers.

The SC-2070 board has screw terminals for all DAQ board signals. With these terminals, the board
easily connects to the analog, digital, timing, and trigger signals. The SC-2070 has an onboard
temperature sensor that can be optionally jumpered to differential channel 0 for thermocouple cold-
junction compensation. With open component positions in the input paths, you can insert resistors and
capacitors for conditioning the 16 single-ended or 8 differential analog input signals. A 1.5 by 4 in.
general-purpose breadboard area is also included. The SC-207X Series boards can also be used in
conjunction with the other signal conditioning accessories, including the SC-206X Series boards and
SSR Series boards. To connect multiple signal conditioning accessories, you must use an SC-205X
Series cable adapter board.

«
...
16
17
18
19
20
...
»

Summary of Contents for SC-207 Series




























































































Reviews:

No comments

Related manuals for SC-207 Series

Brand: Lattice Semiconductor Pages: 15

iCE40 UltraLite

Brand: Lattice Semiconductor Pages: 13

Brand: IOtech Pages: 16

PCI-6110E/6111E

Brand: National Instruments Pages: 113

Brand: XJTAG Pages: 9

Brand: Xilinx Pages: 8

Brand: Kontron Pages: 62

Wisenet PRN-6400DB4

Brand: Hanwha Techwin Pages: 125

Brand: ZALMAN Pages: 9

Brand: Faroudja Pages: 17

RouterBOARD 433

Brand: 4gon Pages: 2

Brand: WEG Pages: 21

Brand: DigiTech Pages: 48

Brand: NetApp Pages: 76

Brand: National Semiconductor Pages: 8

Brand: National Semiconductor Pages: 13

Brand: National Semiconductor Pages: 13

Brand: National Semiconductor Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands