National Instruments Corporation SC-207 Series User Manual Download Page 10 | Manualshive

Page: 10 / 91

background image

© National Instruments Corporation

xi

SC-207X Series User Manual

About This Manual

This manual describes the mechanical and electrical aspects of the SC-2070, SC-2071, and
SC-2072 boards and contains information about installing and making connections to the boards.
The SC-207X Series boards are general-purpose termination breadboards. These breadboards
connect to the National Instruments multifunction data acquisition (DAQ) boards for the
IBM PC/XT/AT, Personal System/2, and compatible computers, and Macintosh II computers.

Each of the SC-207X Series boards is described in detail in this manual.

Organization of This Manual

The SC-207X Series User Manual is organized as follows:

•

Chapter 1, Introduction, describes the SC-207X Series boards, lists what you need to get
started, describes the optional equipment and software, and explains how to unpack your
SC-207X Series board.

•

Chapter 2, SC-2070 Board, describes the SC-2070 board in detail, including function,
compatibility, connection, mounting, and applications. This chapter also discusses working
with thermocouples.

•

Chapter 3, SC-2071 Board, describes the SC-2071 board in detail, including function,
compatibility, connection, mounting, and applications. This chapter also discusses working
with thermocouples.

•

Chapter 4, SC-2072 Board, describes the SC-2072 board in detail, including function,
connection, mounting, and soldering/desoldering.

•

Chapter 5, Installation and Connections, explains how to install and make connections to the
SC-207X Series boards.

•

Appendix A, Specifications, contains specifications for the SC-207X Series boards.

•

Appendix B, Customer Communication, contains forms you can use to request help from
National Instruments or to comment on our products.

•

The Glossary contains an alphabetical list and description of terms used in this manual,
including abbreviations, acronyms, metric prefixes, and symbols.

•

The Index alphabetically list the topics in the manual, including the page where you can find
each one.

«
...
8
9
10
11
12
...
»

Summary of Contents for SC-207 Series




























































































Reviews:

No comments

Related manuals for SC-207 Series

Brand: Abus Pages: 60

Brand: IEI Technology Pages: 21

Brand: EMCIS Pages: 14

Brand: Giacomini Pages: 2

SOUL CALIBUR II

Brand: NAMCO Pages: 26

Brand: ICOP Technology Pages: 34

ipRocketLink IAD 3086

Brand: Patton electronics Pages: 12

Brand: Digital Equipment Pages: 90

Brand: StetSom Pages: 18

Brand: Arctic Pages: 7

NexXxoS GPX-N 970 M03

Brand: Alphacool Pages: 2

SL6NQ - Xeon 2.4 GHz/533MHz/512 KB CPU Processor 2.4GHz

Brand: Intel Pages: 56

Brand: Adaptec Pages: 3

Brand: Boser Pages: 54

Texas Instruments 6711 DSK

Brand: National Instruments Pages: 2

Brand: Waveshare Pages: 23

Brand: Dell Pages: 90

RouterBOARD 711-5HnD

Brand: MikroTik Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands