![Nasco TERi LF04300 Instruction Manual Download Page 38](http://html.mh-extra.com/html/nasco/teri-lf04300/teri-lf04300_instruction-manual_707791038.webp)
38
Set Up
Care and Maintenance
Overall Care and Maintenance
General Care
1. Most cleaning can be done with a soft cloth, mild
soap, and warm water. Avoid over washing the
painted areas on the manikin.
2. Stubborn stains can be treated by using Nasco
Cleaner and a soft cloth.
3. Stains caused by make-up, ink, and newsprint
are indelible and cannot be removed. Avoid
contact with these substances and do not apply
cosmetics or Betadine
®
solution to the manikin.
4. Follow cleaning, care, storage, and maintenance
guidelines in each section of this manual.
5. Remove all batteries prior to storing your
equipment for future use.
Cautions
Solvents or corrosive materials will damage the
simulator. Never place the simulator on any
kind of printed paper or plastic. These materials
will transfer indelible stains. Ball-point pens will
also make indelible stains. Do not store in direct
sunlight.
Storage
In order to prepare TERi for storage perform a
normal manikin breakdown procedure by removing
all of its limbs and packaging them neatly it its case
(preferably in the same packaging offered when
first purchased). In addition, be certain to follow
these instructions:
• Storage temperature should not exceed 122° F (50°
C) or fall below 41 ° F (5° C) on a (non-condensing)
relative humidity free environment.
• If a soft-sided case is being used, the manikin
should lie flat.
• The manikin should NEVER be stored or shipped
with fluids in the system.