![Nasco TERi LF04300 Instruction Manual Download Page 30](http://html.mh-extra.com/html/nasco/teri-lf04300/teri-lf04300_instruction-manual_707791030.webp)
30
Set Up
Auscultation
Auscultation
Features included with LF04302, and LF04302EX.
The auscultation feature duplicates heart and lung
conditions selected by the instructor via wireless
remote control with LCD Display. Palpation is
required to correctly identify the auscultation
locations.
Heart
Sounds are detected at 6 anterior locations with
12 heart conditions:
01 Normal
07 S3 Gallop
02 Aortic Regurgitation
08 S4 Gallop
03 Pulmonary Stenosis
09 Systolic Click
04 Mitral Stenosis
10 Atrial Septal Defect
05 Holosystolic
11 PDA
06 Mid-systolic
12 VSD
Lungs
Sounds are detected at 5 anterior, 6 upper posterior,
4 lower posterior, and 2 mid-axillary locations. With
16 lung conditions:
01 Normal Lungs
09 Cavernous
02 Normal Vesicular
10 Bronchovesicular
03 Wheezes
11 Bronchial
04 Mono Wheeze
12 Pulmonary Edema
05 Fine Crackle
13 Infant
06 Coarse Crackle
14 Friction Rub
07 Rhonchi Crackle
15 Egophony
08 Stridor
16 Pectoriloquy
1. Locate your SmartScope™ and Remote Control
with LCD display.
2. Locate included “AA” and “AAA” batteries.
3. Install 2 “AA” batteries into SmartScope
™
and
2 “AAA” batteries into the remote control. The
compartments are marked as to the positions of
the batteries “+” or “-”.
4. Press the red power button on the remote
control. This turns on the remote control and
sends a signal to activate the SmartScope
™
.
5. After the unit is activated, the LCD display on
the remote control will be in the “status” mode,
displaying the current menu settings for the
heart and lung conditions.
Note: Powering on one remote control will activate
and control all SmartScopes
™
and manikins
simultaneously within a 100-foot range. Multiple
remotes operating within this range will cause
complications and signal confusion.
Selecting New Heart and Lung Conditions
1. Activate remote control and SmartScope
™
using
instructions above.
2. Press either the heart or lung button. This will
put the display into menu mode.
3. Select a condition by using the number buttons
or the scroll button to view the conditions in
sequence.
4. When the desired condition is viewed on the
LCD display, press the enter button to activate.
5. Heart and lung sounds are heard simultaneously.
Check the main screen to ensure the desired
sounds are being heard. For example, when
hearing normal heart sounds and normal lung
sounds, the LCD display will read: HS= (01) LS= (01).