NARVON
5
CLEANING
SERVICING
DISASSEMBLY
(Fig. 7)
CLEANING
(Fig. 8)
1. Lift the lid off.
2. Pull the mixer off.
3. Lift the container with both hands with a light, swinging motion.
Should you have difficulty, it may be necessary to dampen steel
refrigerator and gasket, then repeat the operation.
4. To remove container’s gasket, lift it from its setting.
5. To disassemble the panels, unscrew the nuts on the panels,
pushing up then unlatching.
6. To reassemble the unit, repeat the above operations in reverse.
1. Use neutral soap and lukewarm water to wash container,
lid, mixer/pump, refrigerator, and tap.
2. Rinse carefully with water in order to remove any soap residue.
3. For sanitation purpose wash the parts with a solution of cold
water and sodium hypochlorite (bleach) with 10 grams (1/2
spoon) for 1 liter of water ratio. Rinse with lukewarm water.
For better cleaning and sanitation, use a soft brush.
4. If the dispenser is out of use for a long period of time, remove
the power plug and clean all parts carefully; keep the dispenser
away from dust and cover it with a plastic sheet.
1. After disconnecting the dispenser, remove panels and clean
inside parts, especially condenser fins, with a brush (Fig. 8).
2. Dust reduces the performance of the machine, so clean it at
least once a month.
3. The dispenser does not require oiling.
Any necessary repairs on the machine should be undertaken
exclusively by an authorized repair center, using original
replacement parts.
The electrical cord should not be replaced by the user.
The machine must be turned OFF and unplugged from the power source before cleaning.
CAUTION
Fig. 7
Fig. 8
Do not use abrasive powders which might impair the
container and lid’s shine
DISPOSAL
When the machine is no longer of use, dispose of it properly.
Or if still operational, sell off through an authorized organization
or company.
Summary of Contents for 378D2B26
Page 2: ...NARVON...
