![background image](http://html1.mh-extra.com/html/narvi/steam-ready-905005/steam-ready-905005_installation-and-instruction-manual_3348997018.webp)
15. ELECTRICAL CONNECTIONS
- The electrical connections of the sauna heater
can only be done by an authorised professional
electrical installer and in accordance with
current regulations
- In addition to the power feed, the heater’s row
connector has an auxiliary slot for external power
for controlling the electric heater from the unit
- The electric heating cable is connected directly
to the coupling box of the heater. From there, it
is connected to the row connector of the heater
using a rubber cable with the same diameter as
the connection wire (e.g. the suitable cable for a
6 kW heater is 2*1.5 mm H07RN-F)
- The heater is connected semi-permanently to the
coupling box located in the sauna. A rubber
cable should be used for the connection
(e.g. H07RN-F or similar)
14. INSTALLER INSTRUCTIONS
- Only one heater can be installed in the sauna
- If the home has electric heating, is reduction in
heat necessary?
- Fuses and feed cables conform to regulations
- Narvi Steam Ready is a model that is placed on the
floor, attached from the opposite corners to the floor
- The heater can be installed directly onto
a wooden floor
- The direction of the water being thrown must be
taken into consideration when installing the heater,
as the cover of the steam hatch directs steam
- The heater should be elevated at least 30 mm
using the adjustable feet
- The heater can be placed in an indented wall
location with a height of at least 1900 mm (image 4)
- If the heater is integrated into the sitting area or
a protective rail is installed, the provided
minimum clearances must be adhered to
(Images 5 and 6)
- Leakage may occur when measuring insulation
resistance measurement, which is caused by
humidity in the air that has been absorbed into
the insulation material of the heating elements
during transport of storage. The humidity is
removed from the elements after heating the
element a few times
- Do not connect the power feed of the electric
heater using the residual current circuit breaker
min 50
min 20
min 50
min 20
min 50
min 20
min 1000
min 700
max 500
min 20
min
100
min
100
505
605
820
max 900
min 200
Päävirtakytkin
max 700
min 30
Image 4
min 50
min 20
min 50
min 20
min 50
min 20
min 1000
min 700
max 500
min 20
min
100
min
100
505
605
820
max 900
min 200
Päävirtakytkin
max 700
min 30
min 50
min 20
min 50
min 20
min 50
min 20
min 1000
min 700
max 500
min 20
min
100
min
100
505
605
820
max 900
min 200
Päävirtakytkin
max 700
min 30
Image 6
Image 5
Summary of Contents for STEAM READY 905005
Page 28: ...7 320 Er3 280 2 8 10 15 1 2 2 3 9 5 15 6...
Page 29: ...10 11 12 1 5 3 1 5 13 500 50 100 100 150...
Page 31: ...7 50 7...