NARGESA NOA60, Instruction Book

Page: 84 / 116

- A32 -
EMBOSSING MACHINE NOA60
1. We put into order the different sections
To assemble the rolls of 35mm we will proceed as follows:
2. We do a pre-assembly, without tightening the
bolts, paying special attention in aligning the slots
for the pin.
3. Next we place the outer spacer 5 on the
machine shaft.
4. Place the pre-mounted roller on the axis of the
corresponding machine, top or bottom and tighten
the bolts with the Allen key.
5. Next we place the outer spacer 5 on the
machine shaft. 6. Close the roller compartment with the outer
cover.
1 2