NARGESA NOA60, Instruction Book

Page: 13 / 116

- 14 -
EMBOSSING MACHINE NOA60
Selector
Automatic/Manual
Machine on
light
Power light Anomaly light
Main switch
Reset
button
On/Off
buttons
Manual Potentiometer Automatic Automatic start
button
5. OPERATING MANUAL
5.1. Description of the Control Panel
The electric panel is on the front of the machine, incorporating the control panel described below.
5.2. Start up
To begin working with the Nargesa NOA60 embossing machine, proceed as follows:
- Connect the machine to the electrical power supply.
- Turn Main switch to position 1. The white and red pilot lights will come on.
- Press the reset button (Blue button) and the red pilot light should go off, if this is not the case, check the
emergency stop of the pedal. If it is activated, check that there is no problem in the roller area and unlock it.
Press the blue reset button again, the pilot light should go off.
- Press the On button and when the green light comes on, the machine is ready for use.