NARGESA NOA60, Instruction Book

Page: 12 / 116

- 13 -
Reverse
pedal
Forward
pedal
Direction of material
4.3. Admissible outer conditions
The working conditions of the machine NF70 NARGESA ranges b5 º C and +50 º C and the
maximum continuous tempe45 ° C (24 hours)
The condition of humidity ranges between 30% and 90% non-condensing
.
4.4. Electrical connection
The NARGESA NOA60 embossing machine is designed to be connected to a 230 or 400V three-phase
50/60Hz mains power supply.
If the line voltage isn ’ t as indicated: the frequency inverter IS NOT MULTI-TENSION so if we have to
change the voltage, the inverter must be replaced depending on the supply tension.
On using the machine, take into account that the direction of rotation of the rollers is as indicated in the
illustration when the forward pedal is depressed.
Star figure
(Pre-installed)
For 400V Triangle figure
For 230V