PACIFIC M35
32 |
P a g e
PACIFIC M35 REV.01-17 COD. PA201-M35-ENG
Nardi Compressori – www.nardicompressori.com
PACIFIC MX 48 PACIFIC MX 60 PACIFIC MX 68 PACIFIC MX 85
200
300
200
300
200
300
200
300
PAC-03
8100
12100
6100
9200
5400
8000
4400
6600
PAC-06
16200 24200 12200 18400 10800 16000
8800
13200
Written on the FILTER, press the RESET button until the white bar does not
complete the progression.
The total corresponds below and above.
Press PAGE to proceed
Set the voltage of the power line.
Press PAGE to proceed.
Enable or disable the automatic oil level. In case of the presence sensor, the
display displays the warning of the presence oil, in case of too low level of oil.
Press PAGE to proceed.
Setting to enable soft-start. And is possible to integrate the module soft-start,
the soft start of the electric motor. You have to enable the function to enable
the start of the module.
Press PAGE to proceed
Set the mode AUTOMATIC or MANUAL to use the compressor. In automatic
mode, the compressor will restart automatically under some pressure.
Press PAGE to proceed
Select the pressure transducers optional, and eventual alarm threshold
pressure. Up to 4 sensors simultaneously.
(standard without transducers optional)
Press PAGE to proceed
Set the pressure di'allarme of each transducer, which generates an alarm in
case of over pressure. An alarm is generated even in case of accidental
breakage of the cable or of the transducer.
4 STAGES COMPRESSOR: 1st = 5 BAR; 2nd = 20 BAR, 3rd = 80 BAR
3 STAGES COMPRESSOR: 1st = 12 BAR; 2nd = 80 BAR
