Napoleon Madison GD80NT, Installation & Operation Instructions, Page: 23 / 40

23
W415-0695 / 05.12.08
FINISHING
LOG SHIPPING
BRACKET
Before installing the logs, you must fi rst remove the log shipping
bracket. Lift up to remove.
LOG SHIPPING BRACKET
FIGURE 42
1. Remove the hearth strip / screen assembly and glass door. (Refer to manual).
2. Remove the andiron / grate assembly by removing the 2 screws located behind the andirons.
3. Remove the right log bracket, as shown. Note the position of the securing screw in the bracket.
4. Install the right, left and centre hearth bricks into the fi rebox, as illustrated. The hearth should appear seamless across
the front. Ensure that a ¼" space exists between the hearth bricks and the perimeter of the burner.
5. Ensure that the tabs, located on the back wall of the fi rebox, have been bent forward horizontally.
6. Install the panels in the following order:
A
- RIGHT
B
- REAR
C
- LEFT
D
- BAFFLE
DECORATIVE BRICK PANEL INSTALLATION
FIGURE 43-46
A
D
B
C
TAB TAB
LEFT LEFT
CENTRE CENTRE
RIGHT RIGHT
¼" ¼"
AIR AIR
SPACE SPACE
FRONT HEARTH FRONT HEARTH
NG NG
LP LP
LOG LOG
BRACKET BRACKET
ANDIRON ANDIRON
/ GRATE / GRATE
MOUNTING MOUNTING
SCREW ( SCREW (
X X
2) 2)
SECURING SECURING
SCREW SCREW