Napoleon Madison GD80NT, Installation & Operation Instructions, Page: 22 / 40

22
W415-0695 / 05.12.08
Do NOT use the fi replace if any part has been under water.
Call a qualifi ed service technician IMMEDIATELY to have the fi replace inspected for damage to the electrical circuit.
If access to the control area is necessary BEFORE INSTALLATION, remove the access panel. The access panel
must be re-installed before operating the unit.
It is necessary to hard wire this fireplace.
Permanently framing the fi replace with an enclosure, requires the fi replace junction box to be hardwired.
This fi replace must be electrically connected and grounded in accordance with local codes. In the absence of local codes,
use the current CSA C22.1 CANADIAN ELECTRICAL CODE in Canada or the ANSI/NFPA 70-1996 NATIONAL ELECTRI-
CAL CODE in the United States.
ELECTRICAL CONNECTION
HARD WIRING CONNECTION
SCHEMATIC
FIGURE 41