EN
W415-3006 / A / 05.27.21
31
operation
!
WARNING
• Never use this appliance for other than the intended use. Do not use the appliance to prepare food.
• You must have clear and easy access to the on/off valve AFTER the appliance is installed and connected to the
gas supply in order to safely turn off the burner.
• When lit for the first time, the appliance emits a slight odour. This is a normal temporary condition caused by
the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur again.
Simply run the main burner on high for approximately one-half hour.
• Children and adults should be alerted to the hazards of high surface temperatures and should stay away from
the appliance to avoid burns or clothing ignition.
• Children should be carefully supervised when they are in the area of the appliance.
• Clothing or other flammable materials should not be hung from the appliance, or placed on or near the
appliance. The area above the enclosure may be extremely hot. Direct contact with these surfaces should be
avoided in order to prevent burns or clothing ignition.
• Any guard or protective device removed for servicing the appliance must be replaced prior to operating the
appliance.
• Installation and repair should be done by a qualified service person.
• The appliance should be inspected before each use and at least annually by a qualified service person. More
frequant cleaning may be required as necessary. It is imperative that the control compartment, burners, and
circulating air passageways of the appliance be kept clean.
• Never use the appliance while it is raining.
• Always turn the appliance off when raining.
• Never splash any liquid on the glass/glass embers when the appliance is operating.
• The glass/glass embers will be extremely hot while operating. Never try to touch them.
• Always ensure the appliance stands firmly on level ground.
• Never use the appliance if the burner is damaged. Inspect the burner before each use. Ensure that no debris
such as leaves, grass, or other objects have entered or are on the appliance. If the burner is damaged, it must
be replaced prior to using the appliance with a replacement burner specified by your Napoleon dealer.
• Inspect the hose assembly before each use. If there is evidence of excessive abrasion or wear, or if the hose is
damaged, it must be replaced prior to using the appliance with a replacement hose assembly specified by your
Napoleon dealer.
• Any modification to the appliance may compromise the safety of this appliance. Special concerns include: do
not bypass thermocouple safety; do not operate the appliance if any part has been under water. Immediately
call a qualified service technician to inspect the appliance and replace any part of the control system and any
gas control which has been under water.
The appliance has been designed with several safety features, which include a safety valve. If the burner flame
is extinguished, the appliance will automatically shut down.
note:
NORMAL
ABNORMAL
Each time the appliance is used:
Perform a visual check of the burner flame pattern. An abnormal flame pattern
may be caused by blocked burner ports, inconsistent distribution of glass embers, or refractory rocks which are
placed directly over the burner ports.
