W415-3006 / A / 05.27.21
EN
20
trim installation (optional)
Tighten in
position.
Serrated Side Up
4. Line up the brackets on the trim with the slots on the side of the base and insert as illustrated pushing until trim
sits flush against front surface. The brackets have been designed with multiple slots (1/4” [6mm]) increments to
accomodate different finishing materials.
5. Loosen the thumb screw and lower until it stops. Re-tighten the thumb screw and close the access door.
note:
If using facing materials in
excess of 2.5” (63.5mm), a
gap will be visible between the
brick ledge and the trim.
