W415-1789 / C / 01.29.19
EN
30
10.0 operation
10.1 on/off switch
!
WARNING
• This should be performed after both the appliance and
DHC™ Plus
have been fully installed, including all
venting and finishing materials.
note:
If a lower speed is selected (at the blower housing or remote) to reduce air flow, the result may be a minor
imbalance of the motor that causes a minor humming. While this will not affect the longevity of the motor, it may
result in a noticeable noise depending on the location of the
DHC™ Plus
blower kit.
For optimal performance, the on/off switch in the blower housing must
ALWAYS
be set to the
maximum
speed
setting.
10.2 using remote control
The remote control has 5 different blower speed settings. For optimal performance, the remote control must
ALWAYS
be set to the
maximum
speed setting.
note:
If a lower speed is selected (at the blower housing or remote) to reduce air flow, the result may be a minor
imbalance of the motor that causes a minor humming. While this will not affect the longevity of the motor, it may
result in a noticeable noise depending on the location of the
DHC™ Plus
blower kit.