W415-1789 / C / 01.29.19
EN
18
mounting options
In this mounting option, the wall flashing is flush with finished exterior wall but the exterior housing assembly
is
protruding from the finished exterior wall. A
14 1/2” (36.8cm) by 17 1/4” (44cm) rectangular opening must be
framed into the exterior wall
(see “minimum framing requirements” section for details)
.
6.2 protruding
Top of
Enclosure
Air Outlet
Opening
W
all Flashing
Exterior Housing
Asssembly
12”
(30.5cm)
Ø 6” (152mm)
Hole &
Installed
Collar Plate
Assembly
Exterior
Interior
Air Damper
Assembly
6’ Rigid
Steel Venting
Appliance
(LVX38 Illustrated)
Installed 6” Collar
Plate Assembly
Exterior Housing
Assembly
Interior
Exterior
No materials of any type permitted in this area with the exception of an approved appliance vent system
or the
DHC™ Plus
system.
Left Side Profile View
(Remote Exterior Installation illustrated. Some components may not apply
to your unique installation.)
Top Side View
(Remote Exterior Installation illustrated. Some components may not apply to your unique installation.)
Recommended
DHC™ Plus
collar plate assembly installation zone (12” [30.5cm]).
