background image

Table of Contents 

Ideal for small businesses with multiple users and multiple credential types (PIN, Prox, Bluetooth app)!   

ArchiTech

 Series Locks are an ideal access control solution, blending the advanced and robust Networx

 wireless access 

control system with the classic mortise lock functionality where a simple button press allows for the lock to remain in pas-
sage.  ArchiTech Series Locks can be used to control access a door at a time; across a wireless network; or as an integral 
part of a new or existing security system -- spanning a few, or hundreds of doors, in one building, a campus or multiple sites 
around the world. 

ArchiTech

 

security locks are designed to allow all features to be programmed through its wireless Networx radio link from a 

DL-Windows-equipped computer.  With "wireless" communication, physical cables are NOT required to transfer data be-
tween DL-Windows and the wireless locks.  A Networx Gateway is used in conjunction with your computer to retrieve logs, 
download User credentials and program features into each wireless lock in the system.  In addition, its real-time clock / cal-
endar automatically adjusts for Daylight Saving Time and allows for automated programming of scheduled events.  The 
combination 

Keypad/ProxReader 

allows for additional programming options and user access methods, including keypad-

entered User Codes, multiple proximity credential technologies (125kHz Format, 13.56MHz Format depending on model), 
including proximity cards and fobs, wireless remote releases and Bluetooth LE access via the iLock™ mobile device app.   

T

HE

 

A

RCHI

T

ECH

 

BY

 

N

ETWORX

 

W

IRELESS

 A

CCESS

 C

ONTROL

 S

YSTEM

 

IS

 

A

 S

TATE

-

OF

-

THE

-A

RT

  

M

ICROPROCESSOR

-B

ASED

 C

OMPUTER

 N

ETWORK

 P

ROGRAMMABLE

 P

ROXIMITY

 S

ECURITY

 L

OCK

ArchiTech

 by Networx

 Wireless Locks 

About this Manual ........................................................................ 2 
ArchiTech Features ..................................................................... 3 
Supported Products and Applications ..................................... 4 
Terminology Used in this Manual .......................................... 5-6 
ArchiTech User Number Definitions ......................................... 7 
ArchiTech Series Design Overview ........................................... 8 
Overview: Three Ways to Program ........................................... 9 
Power Up and Secure the Door ...............................................10 
Select "Program Card Programming" Operation ............ 11-12 
"Keypad Programming": Overview of Functions .................13 
"Keypad Programming" Conventions ....................................14 
"Keypad Programming" Functions ................................... 14-25 
"Keypad Programming" Record Sheet ...................................26 

"Keypad Programming" Schedule Record Sheet ................ 27 
"DL-Windows Mode" Operation / Features ...................... 28-30 
Emergency Commands ....................................................... 31-32 
Bluetooth Support ..................................................................... 33 
Using the iLock App ............................................................. 34-35 
Wireless Remote Releases ...................................................... 36 
Low Battery and Battery Replacement .................................. 37 
Erase All Programming ............................................................ 38 
Power Down -- Retain Existing Programming ...................... 39 
LED and Sounder Indications .................................................. 40 
User Card Record Sheet ........................................................... 41 
Glossary ................................................................................. 42-43 
ArchiTech Networx Limited Warranty .................................... 44 

About this Manual 

This manual documents the programming, operation and features of the ArchiTech™ by Networx™ series wireless locks.  If 
you are new to DL-Windows, this manual does not contain preliminary information regarding integration with DL-Windows; 
stop here, read the 

DL-Windows User's Guide

 (OI382) and the 

DL-Windows for Networx User's Guide

 (OI383) to become 

familiar with DL-Windows, then return here.  Some terms you will encounter include:   



The word "

lock

" is a generic word used to indicate one of the many ArchiTech™ by Networx physical locking device 

models available.  This physical lock may be in its normally "locked" state (preventing passage through the door) or in 
an "unlocked" state (allowing passage through the door).   



The word "

credential

" is also a generic word used to indicate a proximity card, a proximity "fob", a Bluetooth iLock app, 

a User Code, or any other type of credential that allows passage through the door.   



In the DL-Windows software, the word "

configure

" has a specific meaning--to "

configure

" is to "assign" discovered phys-

ical ArchiTech series locks to a Gateway module, thus ensuring a fixed wireless communication channel exists between 
selected physical locks and a selected Gateway (see page 4 and OI383 for more information about Gateways). 



The words "

pairing

", "

enrolling

"  and "

programming

"  may be used interchangeably.   



Take care to ensure that the terms "

fob

", "

keyfob

"   or  "

key fob

"  are not misunderstood.  The terms may refer to a 

Wireless Remote Release

 (such as a model RR-4BKEYFOB 

Wireless Remote Release Keyfob

) or the terms may 

refer to a fob-shaped proximity credential (the kind usually placed on a key ring). 

Summary of Contents for Networx ArchiTech













































Reviews: