5
1
INSTALLING THE ISEE-VCAM1
•
The
ISEE-VCAM1
camera is designed for table top, wall or ceiling mounting. Install bracket at desired location and
attach the camera body to bracket.
•
Plug camera power cable into
POWER
and CAT5 into
LAN
jacks.
•
Connect the other end of the CAT5 cable to the
ISEE-EOP-MOD200
Ethernet-Over-Power module
LAN
jacks.
•
Plug
ISEE-EOP-MOD200
module and camera power supply into AC wall outlet
•
Repeat for each camera to be installed.
Table top mount
Wall mount
Ceiling mount
Note: If AC power-strips
are required due to un-
available AC outlets, non
surge protected or noise
filtered power-strips must
be used. Many AC power-
strips utilize internal surge
protection that may pre-
vent the EOP modules
from operating.
EOP module must
be plugged directly
into wall outlet
