background image

 

20 

NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants 
its products to be free from manufacturing defects in 
materials and workmanship for 

twelve months

 following 

the date of manufacture. NAPCO will, within said period, 
at its option, repair or replace any product failing to 
operate correctly without charge to the original 
purchaser or user. 

This warranty shall not apply to any equipment, or any 
part thereof, which has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to acts of God, or on which any 
serial numbers have been altered, defaced or removed. 
Seller will not be responsible for any dismantling or 
reinstallation charges. 

THERE ARE NO WARRANTIES, EXPRESS OR 
IMPLIED, WHICH EXTEND BEYOND THE 
DESCRIPTION ON THE FACE HEREOF. THERE IS 
NO EXPRESS OR IMPLIED WARRANTY OF 
MERCHANTABILITY OR A WARRANTY OF FITNESS 
FOR A PARTICULAR PURPOSE. ADDITIONALLY, 
THIS WARRANTY IS IN LIEU OF ALL OTHER 
OBLIGATIONS OR LIABILITIES ON THE PART OF 
NAPCO. 

Any action for breach of warranty, including but not 
limited to any implied warranty of merchantability, must 
be brought within the six months following the end of the 
warranty period.  

IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE 
FOR ANY CONSEQUENTIAL OR INCIDENTAL 
DAMAGES FOR BREACH OF THIS OR ANY OTHER 
WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE 
LOSS OR DAMAGE IS CAUSED BY THE SELLER'S 
OWN NEGLIGENCE OR FAULT. 

In case of defect, contact the security professional who 
installed and maintains your security system. In order to 
exercise the warranty, the product must be returned by 
the security professional, shipping costs prepaid and 
insured to NAPCO. After repair or replacement, NAPCO 
assumes the cost of returning products under warranty. 
NAPCO shall have no obligation under this warranty, or 
otherwise, if the product has been repaired by others, 
improperly installed, improperly used, abused, altered, 
damaged, subjected to accident, nuisance, flood, fire or 
acts of God, or on which any serial numbers have been 
altered, defaced or removed. NAPCO will not be 
responsible for any dismantling, reassembly or 
reinstallation charges. 

This warranty contains the entire warranty. It is the sole 
warranty and any prior agreements or representations, 
whether oral or written, are either merged herein or are 
expressly cancelled. NAPCO neither assumes, nor 

authorizes any other person purporting to act on its 
behalf to modify, to change, or to assume for it, any 
other warranty or liability concerning its products. 

In no event shall NAPCO be liable for an amount in 
excess of NAPCO's original selling price of the product, 
for any loss or damage, whether direct, indirect, 
incidental, consequential, or otherwise arising out of any 
failure of the product. Seller's warranty, as hereinabove 
set forth, shall not be enlarged, diminished or affected by 
and no obligation or liability shall arise or grow out of 
Seller's rendering of technical advice or service in 
connection with Buyer's order of the goods furnished 
hereunder. 

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM 
BE COMPLETELY TESTED WEEKLY. 

Warning: 

Despite frequent testing, and due to, but not 

limited to, any or all of the following; criminal tampering, 
electrical or communications disruption, it is possible for 
the system to fail to perform as expected. NAPCO does 
not represent that the product/system may not be 
compromised or circumvented; or that the product or 
system will prevent any personal injury or property loss 
by burglary, robbery, fire or otherwise; nor that the 
product or system will in all cases provide adequate 
warning or protection. A properly installed and 
maintained alarm may only reduce risk of burglary, 
robbery, fire or otherwise but it is not insurance or a 
guarantee that these events will not occur. 
CONSEQUENTLY, SELLER SHALL HAVE NO 
LIABILITY FOR ANY PERSONAL INJURY, PROPERTY 
DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE 
PRODUCT FAILED TO GIVE WARNING. Therefore, the 
installer should in turn advise the consumer to take any 
and all precautions for his or her safety including, but not 
limited to, fleeing the premises and calling police or fire 
department, in order to mitigate the possibilities of harm 
and/or damage.  

NAPCO is not an insurer of either the property or safety 
of the user's family or employees, and limits its liability 
for any loss or damage including incidental or 
consequential damages to NAPCO's original selling 
price of the product regardless of the cause of such loss 
or damage. 

Some states do not allow limitations on how long an 
implied warranty lasts or do not allow the exclusion or 
limitation of incidental or consequential damages, or 
differentiate in their treatment of limitations of liability for 
ordinary or gross negligence, so the above limitations or 
exclusions may not apply to you. This Warranty gives 
you specific legal rights and you may also have other 
rights which vary from state to state.       

 

NAPCO LIMITED WARRANTY 

 

Summary of Contents for iSeeVideo ISEE-VCAM1





















Reviews: