NAPCO iBridge Suite, Quick Start Manual

Page: 12 / 20

12
Configure the Wireless Cameras. Be sure all wireless
cameras are powered, then tap (3) Configure Wireless Cam-
era .
A confirmation popup appears; tap Yes to proceed (or tap No
to exit without saving changes).
Wait while the IBR-ITAB searches for all cameras. When
finished searching, the IBR-ITAB lists all the discovered
cameras by IP address. Tap to select each camera one at a
time and tap "
Lock " to lock the camera. Exit when complete.
Lock Down the ISEE-WAP.
In the Connection Settings menu, tap (4) Lock Down
IBRIDGE ISEE-WAP .
Locking the ISEE-WAP turns off the default "PUBLIC" SSID
so no other systems can connect to your equipment. Any
new IBR-ITABs will have to use the new SSID and Key en-
tered in the
Preferred Network dialog above.
In
the Information popup that appears, tap Continue .
Wait several seconds until the following popup appears:
Tap
OK to close.