25
T R O U B L E S H O O T I N G
What do I do if...
For more info...
I try to arm my system but the keypad just displays “ZONES FAULTED” and “CAN’T ARM SYSTEM”
and beeps at me.
If the green STATUS light is off, a zone is open. Find and secure the open window or door.
See Page 6
I try to arm my system but the keypad displays “CAN’T ARM SYSTEM...PRESS RESET” and beeps
at me. The Troubles are displayed.
A System Trouble has been detected. Note the scrolling error codes, which represent the trouble.
Press
C
and you will now be able arm to the system, but the trouble must be fixed as soon as
possible.
See Page 7 & 23
The Fire Alarm is sounding and I don’t know how to turn it off.
If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department
from an outside phone. If there is no evidence of a fire, enter your code and press
U
to silence
the alarm. Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light
will be on. Press
C
to silence the keypad sounder. Press
C
again to reset smoke detec-
tor. If FIRE icon (
I
) does not clear, call for service.
See Page 11
Summary of Contents for GEM-RP8LCD
Page 29: ...29 NOTES ...
Page 30: ...30 NOTES ...
