Appendix B
Cable Waterproof Shroud
Trillium Compact User Guide
16889R5
2014-03-04
73
3. Lightly grease the cleaned surface around the Trillium Compact Posthole connector.
4. Loosen the cable gland cap nut of the cable assembly and slide the waterproof
shroud up the cable to expose the connector.
5. Attach the connector on the cable assembly to the connector on the Trillium
Compact Posthole by twisting the locking ring of the cable assembly connector until it
snaps into the locked position.
6. Slide the waterproof shroud over the connector and align the holes in the adapter to
those in the top of the Trillium Compact Posthole.
7. Insert the four attachment screws and tighten firmly (recommended torque to 1 n-M,
or 9
in-lb).
8. Tighten the cable gland cap nut of the cable assembly to 12 N-m (106 in-lb), or if a
suitable torque wrench is not availabl, tighten the cap nut to finger tight and then give
it two additional full turns with a wrench.
Figure B-2
Installing the cable waterproof shroud
O-RING SEAL IN PLACE
CABLE GLAND CAP NUT
SENSOR
WATERPROOF SHROUD WITH
CABLE CONNECTOR
FOUR WATERPROOF SHROUD
ATTACHMENT SCREWS
