Safety precautions
Review and follow the safety instructions below :
· If water or other material enters the instrument, adaptor, or power inlet,
disconnect the power cord and contact a service person. For operating environment,
refer to Product Specifications (page 58).
· Do not touch the main plug or power cord with wet hands.
· Always ensure that the power supply input voltage matches the voltage
available at your location.
· This instrument is air-cooled and its surfaces may become hot during
operation. When installing leave a space of more than 10 cm (4 inches)
around the instrument and do not place any objects between the instrument
and the walls.
· Do not install an instrument on a slant or a place prone to vibrations, which
induces the risk of malfunction or damage of the instrument.
· Never insert any objects into the air vents of the instrument as this could
result in electrical shock, personal injury, and equipment damage.
· Plug the power cord firmly into the wall outlet and AC adapter.
· To avoid potential shock hazard, make sure that the power cord is properly
grounded.
· Be sure to position the equipment such that it is easy to disconnect.
· Turn off the instrument before unplugging the power cord and/or moving the
instrument.
· If the instrument is dropped or broken, disconnect the power cord and
contact a service person. The warranty will be void in case of disassembly.
· Use only authorized accessories (adaptor, power cord, and USB drive).
Warning
Class A equipment is intended for use in an industrial environment.
In the documentation for the user, a statement shall be included drawing
attention to the fact that there may be potential difficulties in ensuring
electromagnetic compatibility in other environments, due to conducted as well as
radiated disturbances.
JuLI
TM
Br, Cell History Recorder ©2012 NanoEnTek Inc.
57