· Dual scope channel can be checked at once by pressing
Dual view
button
when 2
nd
scope unit is connected to station unit.
To close dual view mode, double click it.
· If the movie should be finished while recording,
press
Stop button
.
Then the confirmation message as below will be shown.
Press
OK button
.
· Unexpected problems such that the power is off suddenly or
the scope unit is not connected to station unit while movie recording
could be happened.
Then the error message as below would be shown after restarting
the instrument.
Recorded data before getting in problem is saved in the disk of
instrument temporarily. So press
OK button
if the movie recording
should be continued.
8.
Recorded data can be opened in
Data menu. (page 20)
Operation
Monitoring
JuLI
TM
Br, Cell History Recorder ©2012 NanoEnTek Inc.
23