19
19
3. Photo Mode
This screen is used to capture still images using your Car DVR. To access the Photo screen ensure that the camera is not recording and
press the
(Mode) button. Photo mode also has a menu which is used to edit the photo settings. This menu can be accessed by
pressing the
(Menu) in the Photo Screen.
3.1 Photo Menu
3.1.1 Capture Mode
Capture mode is used to set a delayed timer. To set a timer delay follow the instructions below.
1.
Enter the Photo screen.
2.
Press the
(Menu) Button to enter the
Photo Menu
.
3.
Use the
and
Buttons to navigate the
Photo Menu
and highlight
Timer
setting and press
(Rec/Ok) to select.
4.
Use the
and
Buttons to highlight your required timer delay, then press the
(Rec/Ok) button to confirm your
selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.
This setting can only be accessed through the
Photo Menu
, please make sure that you are in the
Photo screen
when you access the menu.
3.1.2 Resolution
Resolution
sets the still image quality. Higher resolution images will capture more detail and will also produce larger files. To
change the photo resolution, please follow the instructions below.
1.
Enter the Photo screen.
2.
Press the
(Menu) Button to enter the
Photo Menu
.
3.
Use the
and
Buttons to navigate the
Photo Menu
and highlight
Resolution
setting and press
(Rec/Ok) to
select.
4.
Use the
and
Buttons to highlight your required resolution, then press the
(Rec/Ok) button to confirm your
selection.
