15
2.7.4 WDR
The
WDR
setting increases the dynamic range of the camera. To turn this setting on or off, please follow the instructions
below.
1.
Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2.
Press the
(Menu) Button to enter the
Video Menu
.
3.
Use the
and
Buttons to navigate the
Settings Menu
and highlight the
WDR
setting and press
(Rec/Ok) to
select.
4.
Use the
and
Buttons to highlight either OFF or ON, then press the
(Rec/Ok) button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.5 Motion Detection
Motion
Detection
is used to pause recording when no motion is detected in front of the camera, and to start recording
when motion is detected again. To activate the
Motion Detection
setting follow the instructions below.
1.
Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2.
Press the
(Menu) Button to enter the
Video Menu
.
3.
Use the
and
Buttons to navigate the
Settings Menu
and highlight the
Motion Detection
setting and press
(Rec/Ok) to select.
4.
Use the
and
Buttons to highlight either OFF or ON, then press the
(Rec/Ok) button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
