17
2.7.8 G Sensor (Gravity Sensing)
The
G Sensor
defines the required force needed to trigger emergency recording. Once Emergency recording is triggered
the current recording will be saved and protected from being saved over by the normal loop recording. To set the required
sensitivity please follow the instructions below.
1.
Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2.
Press the
(Menu) Button to enter the
Video Menu
.
3.
Use the
and
Buttons to navigate the
Settings Menu
and highlight the
Gravity Sensing
setting and press
(Rec/Ok) to select.
4.
Use the
and
Buttons to highlight either OFF or ON, then press the
(Rec/Ok) button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.
If your memory card is filling up quickly you may need to lower the sensitivity of the
G Sensor
(Gravity Sensor)
to decrease the number of triggers
caused by normal driving.
2.7.9 Key Beeps
The key beeps setting mutes the beep button that is emitted when a button on the Car DVR is pressed
1.
Press the
(Rec/Ok) Button to stop the Car DVR from recording.
2.
Press the
(Menu) Button to enter the
Video Menu
.
3.
Use the
and
Buttons to navigate the
Settings Menu
and highlight the
Key Beeps
setting and press
(Rec/
Ok) to select.
4.
Use the
and
Buttons to highlight either OFF or ON, then press the
(Rec/Ok) button to confirm your selection.
Note:
1.
Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.