background image

27

  

3.3 Playback Screen

 

   

 This screen is used to playback photos and videos. To access the 

Playback screen 

ensure that the camera is not recording and 

hold the 

M

 (Menu/Mode) button for 3 seconds. This will send the camera to the photo screen. While in the Photo Screen hold the   

(Menu/Mode) button for another 3 seconds which will bring you to the 

Playback Screen

.

 

   

 In this screen the 

<

 and 

>

 buttons are used to cycle through the recorded videos and photos and the 

OK

 button is used to play 

and pause videos.

 

   

In the 

Playback Screen

 photos and videos can also be locked and deleted via the 

Playback Menu

.

 

   

This menu can be accessed by pressing the 

M

 (Menu/Mode) in the Photo Screen.

 

  3.4 Playback Menu

 

  

 

3.4.1 Deleting Photos and Videos

 

   

 

To delete an unlocked photo or video follow the instructions below.

  

  1.

  Navigate to the playback screen using the instructions in the section labelled 

Playback Screen

 

  

 

2.

  In the Playback Screen use the 

<

 and 

>

 buttons to select the photo or video that 

you want to delete (if you want to delete all unlocked photos and videos select any 
unlocked Photo or Video).

 

  

 

3.

   Press  the 

M

 ((Menu/Mode) button to enter the Playback Menu and use the 

<

 and 

>

 buttons to select the 

Delete 

setting.

 

  

  4.

   Use  the 

<

 and 

>

 Buttons to select either 

Delete All

 which will delete all unlocked 

photos and videos, or 

Delete Current

 which will delete the selected photo or 

video.

    

 

5.

 Press the 

OK

  button to confirm the deletion.

Note:

 

 1.

  Menus cannot be accessed while the camera is recording. Please stop the recording 

before attempting to access the menu.

 

 2.

   You will only be able to delete videos that have not been protected by a 

G Sensor

.

 

 3.   

To unlock protected files please follow the directions in the section marked 

Protect 

Photos 

and 

Videos

.

 

4.

   To easily delete all files on the inserted Micro SD Card, please follow the instructions given 

in the section marked 

Format

.    

Summary of Contents for NCP-DVRGPS



































Reviews: