NANO CAM NCP-DVRGPS, User Manual

Page: 13 / 34

2.8.4 Exposure
Exposure is used to manually control the light sensitivity settings. To change the
Exposure setting follow the instructions below.
1. Press the
OK
Button to stop the Car DVR from recording.
2. Press the
M
Button to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the
Video Menu and highlight the
Exposure setting and press
OK
to select.
4. Use the
<
and
>
Buttons to highlight your required Exposure setting, then press
the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
2.8.5 Motion Detection
Motion Detection is used to pause recording when no motion is detected in front
of the camera, and to start recording when motion is detected again. To activate the
Motion Detection setting follow the instructions below.
1. Press the OK Button to stop the Car DVR from recording.
2. Press the
M
Button to enter the Video Menu.
3. Use the
<
and
>
Buttons to navigate the
Video Menu and highlight the
Exposure setting and press
OK
to select.
4. Use the
<
and
>
Buttons to highlight either OFF or ON, then press the
OK
button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording
before attempting to access the menu.
13