N&W Global Vending Snakky, Installation, Use And Maintenance Manual

Page: 10 / 68

6
© by NECTA VENDING SOLUTIONS SpA 0306 180-02
Chapter 1
LOADING AND CLEANING
MAIN SWITCH
When extracting the sliding compartment,a special switch
(see Fig. 5) disconnects the power from the machine
electrical system to allow maintenance and cleaning op-
erations in full safety.
The only parts that stay energised are those protected
by covers and carrying a plate with the warning “dis-
connect the power before removing the cover”.
CONFIGURING THE SPIRALS
According to the size of the products to be dispensed, each
machine can be fitted with a variable number of trays
(maximum 6), product compartments and with dispensing
spirals of different pitch.
Fig. 5
1 - Door opening handle
2 - Trays
3 - Lock
4 - Product passage photocells (optional)
5 - Product dispensing compartment
6 - Main switch
Fig. 6
1 - Tray
2 - Mobile walls
3 - Right-hand spiral
4 - Left-hand spiral
The spirals can be housed either in 152 mm compartments
(two spirals, right-hand and left-hand, in each product
holder) for large size products, or into 75 mm compart-
ments (one right-hand spiral in each product holder) for
small size products.
When dispensing sticks of candies or similar products, it is
possible
to set the rotation of the spirals to 180° instead of 360° for
the 75 mm compartments and use a special right hand
spiral fitted with a divider (see Fig. 7), doubling the capacity
of the compartments.
It is possible to insert a divider in the already installed
spirals (see Fig. 7).
Fig. 7
1 - 180° rotation spiral
2 - Divider
A - Spiral pitch
B - Maximum product size