N&W Global Vending Snakky, Installation, Use And Maintenance Manual

Page: 6 / 68

INTRODUCTION
This technical documentation is part and parcel of
the machine and must always follow the machine in
case it is moved or ownership is transferred, so as
to allow consultation by different operators.
Before starting installation and using the machine, it is
first necessary to carefully read and understand the in -
structions contained in this manual, as they offer impor -
tant information on installation safety, operating instruc -
tions and maintenance.
T
his manual is divided inTo Three chapTers
.
The first chapter describes the loading and routine
maintenance operations which are carried out in areas of
the machine accessible with simple use of the door key,
without using any other tools.
The second chapter contains the instructions for cor-
rect installation and all information necessary for opti -
mum use of the machine.
The third chapter describes maintenance operations
which involve the use of tools to access potentially dan -
gerous areas.
The operations described in the second and third chap -
ters must be carried out only by personnel who have the
specific knowledge of the machine functioning from a
point of view of electrical safety and health regulations.
IDeNTIfICaTION Of The veNDINg
maChINe aND ITs ChaRaCTeRIsTICs
Every machine is identified by its own serial number,
indicated on the rating plate attached inside the cabinet
on the right side.
This plate (see fig. 1) is the only one acknowledged by
the manufacturer as the identification of the apparatus,
and carries all the data which readily and safely give
technical information supplied by the manufacturer. It
also assists in the spare parts management.
IN Case Of faIlURe
In most cases, any technical problems are corrected by
small repair operations; however, before contacting the
manufacturer we recommend that this manual be read
carefully.
Should there be serious failures or malfunctions, contact
the following:
N&W GLOBAL VENDING S.p.A.
Via Roma 24
24030 Valbrembo
Italy - Tel. +39 - 035606111
TRaNspORT aND sTORage
To prevent any damage, special care should be taken
when loading or unloading the machine.
The machine can be lifted by a motor-driven or manual
forklift truck, and the forks are to be placed underneath
the machine from the side clearly indicated by the sym -
bol on the cardboard package.
Do not:
overturn the vending machine;
-
drag the vending machine with ropes or similar;
-
lift the vending machine by its sides;
-
lift the vending machine with slings or ropes;
-
shake the vending machine.
-
The machine should be stored in a dry room where the
temperature remains between 0° C and 40 °C.
Avoid stacking machines one on top of the other and
always keep it upright as indicated by the arrows on the
packing.
Refrigeration system class
Absorbed power
Operating voltage
Model
Product code
Type and amount of refrigerant gas
Current
Frequency
Serial number
Type