N&W Global Vending Snakky, Installation, Use And Maintenance Manual

Page: 25 / 68

21
© by NECTA VENDING SOLUTIONS SpA 0306 180-02
DISPLAY
This set of functions is used to manage the messages
indicated on the external display.
LANGUAGE
There is an option of language, selected among the
available ones, to be used for the messages on the
display.
DISPLAYING MESSAGES FOR THE USER
It is possible to choose the kind of information to be
indicated on the display during normal operation.
The following information can be displayed:
- Internal temperature
- Time
It is possible to choose the language for the displayed
messages.
PROMOTIONAL MESSAGE
Enable
When in this menu, press the confirm button “ ” to display
the status of the message (enabled or disabled). The
status can then be changed using the “ ” and “ ” buttons.
Setting
The 2-line message can be written using the “ ” and “ ”
buttons to scroll through the available characters.
Press the confirm button “ ”, the first character will start
blinking and can be modified.
The message is stored by pressing button “ ”.
CUSTOMISING THE MESSAGES
The machine uses standard messages to give information
to the user during normal operation (e.g. “Ready”, “Take”
etc.). When this function is enabled, the message can be
changed in the same manner as setting the promotional
message. Changes are stored as copies of the standard
messages.
Therefore, if this function is disabled, the standard mes-
sages will be displayed again, but the changed messages
are still stored.
DISPLAY THE SELECTION COUNTERS
This function is used to enable/disable the display of the
total number of sales since the last statistic reset, during
the start-up phase of the machine.
LCD CONTRAST CONTROL
This function is used for adjusting the display contrast
from 5% to 99% (default).
MISCELLANEOUS
This set of functions contains some sub-menus, used less
frequently, which permit control of the functions described
below.
PASSWORD
ENABLING THE PASSWORD
This function is used to enable the option of requesting the
password to access the technician menu; the password
request is disabled by default.
ENTERING THE PASSWORD
It is a 5-digit numeric code which is required to access the
technician menu.
The default value of this code is set to 00000.
ENERGY SAVING
This function, disabled by default, is used to suspend
vending in certain hours.
2 switch-of time bands can be programmed.
DISPLAYING THE FILLER MENU
This function is used to determine the filler menu options
to be left active or to be disabled (ON/OFF):
- Statistics
- Single selection prices
- Change tubes control
- Special selections
- Test
- GSM connection
- EVADTS
The reference numbers of the menus do not change even
if some are disabled.
EXTERNAL LIGHTING
Setting whether or not the lighting lamps are to be switched
on when the machine is out of service or during the
“Energy saving” time band
.