N&W Global Vending Snakky RY, Installation Manual

Page: 26 / 52

© by N&W GLOBAL VENDING S.p.A.
22
06 2007 294-00
D
isplay
this set of functions is used to manage the messages
indicated on the machine display.
l
aNgUage
There is an option of language, selected among the
ones available in the software, to be used for the mes -
sages on the display.
D
isplayiNg messages for tHe User
It is possible to choose the kind of information to be indi -
cated on the display during normal operation.
The following information can be displayed:
- Internal temperature
- time
It is possible to choose the language for the displayed
messages.
p
romotioNal message
Enabling
When in this menu, press the confirm button
�
to dis-
play the status of the message (enabled or disabled).
the status can then be changed using the
�
and
�
buttons.
Setting
For setting a promotional message of 2 lines maximum.
Press the confirm button
�
, the first character will start
blinking and can be modified.
the
�
and
�
are used to scroll through the available
characters; press again the confirm button to go to the
next character to be modified.
The promotional message is stored by pressing button
�
.
p
ersoNalisiNg tHe staNDarD messages
The machine uses standard messages to give informa -
tion to the user during normal operation (e.g. “Ready”,
“Take” etc.).
Enabling this function it is possible to modify the stand -
ard message in the same manner as the promotional
message. Changes are stored as copies of the standard
messages.
therefore, if this function is disabled, the standard mes-
sages will be displayed again, but the changed mes -
sages are still stored.
D
isplayiNg tHe selectioN coUNter
This function is used to enable/disable the display of the
total number of sales since the last statistic reset, during
the start-up phase of the machine.
a
DjUstiNg tHe
lcD
coNtrast
This function is used for adjusting the LCD display con -
trast between 5% and 99% (default).
TECH>
SET PARAMETERS
TECH>
DISPLAY
�
�
TECH>
PROMO. MESSAGE
�
xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxx
�
�
m
iscellaNeoUs
this set of functions contains some sub-menus, used
less frequently, which permit control of the functions
described below.
p
assworD
It is a 5-digit numeric code which is required to access
programming.
By default this code is set to 00000.
Enabling the password
This function is used to enable the option of requesting
the password to access the technician menu; the pass -
word request is disabled by default.
When enabling the function the password is entered.
Entering the password
Press the confirm button
�
, the first character will start
blinking and can be modified.
The buttons will take on their respective numeric values;
after entering the first value the next digit is presented
automatically.
After entering the values, press button
�
and the display
will show the message “Confirm?”; press again the con -
firm button to store the password.
e
Nergy saviNg
This function, disabled by default, is used to suspend
vending in certain hours.
2 suspended service time bands can be programmed
for each day of the week; the week days are identified
by a progressive number (1=Monday, 2=Tuesday etc.).
For example, in order to set energy saving time bands
to dispense snack products from 07.00 to 22.00 during
the week and disable the dispensing on Saturday and
Sunday, the time bands should be set as indicated in the
table.
When the “energy saving” time band is triggered the
lighting lamps stay on and the display will show the mes -
sage “Out of service”.
D
isplayiNg tHe filler meNU
This function is used to determine the filler menu options
to be left active or to be disabled (ON/OFF):
- statistics
- Single selection prices
- change tubes control
- Special selections
- test
- Gsm connection
- eVadts
the reference numbers of the menus do not change
even if some are disabled.
day 1 2 3 4 5 6 7
t band1
start 00.00 00.00 00.00 00.00 00.00 00.00 00.00
end 07.00 07.00 07.00 07.00 07.00 23.59 23.59
t band2
start 22.00 22.00 22.00 22.00 22.00 00.00 00.00
end 23.59 23.59 23.59 23.59 23.59 00.00 00.00