N&W Global Vending Snakky RY, Installation Manual

Page: 30 / 52

© by N&W GLOBAL VENDING S.p.A.
26
06 2007 294-00
up kEy
s
etUp coNtrol
U
p
k
ey
>
veNDiNg macHiNe
When confirming this function after inserting the Up-Key
in the special port located on the C.P.U. board, it will be
possible to select the setup file from the list shown on
the display using the scrolling buttons, then when con -
firming with the confirm button the selected setup will be
loaded in the vending machine.
v
eNDiNg macHiNe
> U
p
k
ey
When confirming this function after inserting the Up
Key in the special port located on the C.P.U. board, it
will be possible to save the setup file to the Up Key with
the configuration present in that moment in the vending
machine, indicating the name to be assigned to the file
(SNACK000.STP).
D
elete
This function is used for deleting one by one the setup
files present in the inserted Up Key.
D
elete all
This function is used for deleting all the setup files
present in the inserted Up Key.
s
tatistics coNtrol
v
eNDiNg macHiNe
> U
p
k
ey
When confirming this function after inserting the Up Key
in the special port located on the C.P.U. board, it will be
possible to save the statistics file to the Up Key with the
statistics files present in that moment in the vending
machine, indicating the name to be assigned to the file
(SNACK000.STA).
D
elete
This function is used for deleting one by one the statis -
tics files present in the inserted Up Key.
D
elete all
This function is used for deleting all the statistics files
present in the inserted Up Key.
gSm
The control software can send, via GSM modem, a
signal indicating a machine failure or an “ending product”
“pre-alarm”, after dispensing a programmable number of
selections.
The machine is pre-set to handle 7 pre-alarms.
The first five can be associated to spirals and the last 2
to trays.
p
iN coDe
This function is used for programming the identification
code that will be sent to the GSM modem (optional)
when switching the machine on.
s
ettiNg tHe tHresHolDs
This function is used for defining the number of pieces
after which a “ending product” pre-alarm is signalled via
modem.
r
esettiNg tHe coUNters
With this function the counters that control the pre-
alarms are reset.
t
HresHolD associatioN
This function is used for defining which spirals or trays to
associate to “pre-alarms” for “ending product”.
By associating spiral 10 to pre-alarm N. 1 and setting the
threshold to 10 units with the “threshold setting” function,
dispensing the tenth product from spiral 10 will generate
a pre-alarm N. 1.
By associating tray N. 5 to pre-alarm N. 6 and setting the
threshold to 30 units with the “threshold setting” function,
dispensing the thirtieth product from tray 5 will generate
a pre-alarm N. 6.
b
aNk
N
Umber
The number in the bank of machines (1 to 7) that identi -
fies the machines that have the “GSM slave” function,
therefore sending data via the modem of the “master”
machine.
The number 0 identifies the machine that is connected
directly to the modem, i.e. the “master GSM”.
TECH>
GSM
TECH>
“List of functions”
�
�