NAMCO TANK! TANK! TANK! Manual Download Page 94

Page: 94 / 144

8. MAINTENANCE

(3) Replacing the Namcam 3 (camera)

To protect the service staff and other people from electric shock, accident and in-

jury and to prevent damage to the electric circuitry of the machine, be sure to turn
off the power switch before initiating the described task.

The PC board can be easily damaged by static electricity. If the PC board

is handled by a person charged with static electricity, parts mounted on
the PC board can become damaged. Before touching the PC board, be
sure to remove static electricity from your body by touching a grounded
metal.

Remove the four Torx bolts (M5 x 8) and dismount the tank.

Disconnect the USB connector.

Remove the two countersunk washer nuts (M4) and dismount the camera stay.

Torx bolt (M5 x 8)

Camera Cover

Countersunk washer nuts (M4)

Camera stay

USB connector

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Summary of Contents for TANK! TANK! TANK!

















































































































































Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands

NAMCO TANK! TANK! TANK!, Manual

Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands