NAMCO TANK! TANK! TANK! Manual Download Page 28

Page: 28 / 144

5. INSTALLATION

5-3-5 Installing the Compressor Assy - To be conducted by a technician only -

The Compressor Assy can be installed on the left side or right side of the Front Assy,
depending on the installation layout.

When connecting the air tubes, be sure to insert the air tubes all the way for secure
connection. If the air tubes are not securely attached, they can disconnect and
disallow proper functioning of the machine.

(1) Installing the Compressor Assy on the left side of the Front Assy

Connect the air tube extending from the provided joint to the tube joint located on

the left side of the Front Assy. Be sure to insert the air tube all the way for secure
connection.

CAUTION

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Summary of Contents for TANK! TANK! TANK!

















































































































































Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands

NAMCO TANK! TANK! TANK!, Manual

Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands