NAMCO TANK! TANK! TANK! Manual Download Page 113

Page: 113 / 144

110

8. MAINTENANCE

(4) Replacing the Fire button

To protect the service staff and other people from an electric shock, accident and
injury, and to prevent damage to the electrical circuitry of the machine, always turn
off the power switch before conducting the described task.

Remove the switch cover. (See “8-3-6 (2) Replacing the switch cover.”)

Disconnect the connector from the Fire button to be replaced.

While pressing the hooks, remove the Fore button and replace it.

To reinstall, follow the removal sequence in reverse.

When installing the Fire button, align the protrusions on the Fire button

with the indentations on the steering. Also, make sure that the connector
hook is positioned toward the outside.

Fire button

Protrusion

Indentations

Steering

Connector hook
positioned toward
the outside

Hooks

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Summary of Contents for TANK! TANK! TANK!

















































































































































Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands

NAMCO TANK! TANK! TANK!, Manual

Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands