NAMCO TANK! TANK! TANK! Manual Download Page 105

Page: 105 / 144

102

8. MAINTENANCE

8-3-4 Seat Base Assy - To be conducted by a technician only -

(1) Replacing the pneumatic valve in the Seat Base Assy

To protect the service staff and other people from an electric shock, accident and
injury, and to prevent damage to the electrical circuitry of the machine, always turn
off the power switch before conducting the described task.

Remove the two button-head bolts (M5 x 30), two flat washers (M5), three button-

head bolts (M5 x 12) and three flat washers (M5), and dismount the floor cover.

Remove the four button-head bolts , and dismount the seat front cover.

Button-head bolt
(M5 x 30)

Floor cover

Button-head bolt
(M5 x 12)

Flat washer
(M5)

Flat washer (M5)

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Summary of Contents for TANK! TANK! TANK!

















































































































































Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands

NAMCO TANK! TANK! TANK!, Manual

Search results

Summary of Contents for TANK! TANK! TANK!

Reviews:

Related manuals for TANK! TANK! TANK!

Brands by name

Popular brands