![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v/ridge-racer-v_operators-manual_704720042.webp)
Page 41
5.
Feed the Link Cable between the two games, taking care to keep the cable away
from the Pedal Assy, and connect to each Game PCB as shown below.
6.
Enter the Left Player test by sliding the 1 Player test switch ON. In the GAME
OPTIONS Screen 1 of 2, set the left seats PCB ID to 1 LEFT. Select EXIT to
exit from the Game Options, then turn the Test switch OFF.
7.
Enter the Right Player test by sliding the 2 Player test switch ON. In the GAME
OPTIONS Screen 1 of 2, set the right seats PCB ID to 2 RIGHT. Select EXIT
to exit from the Game Options, then turn the Test switch OFF.
For more details of the Test Routines see 6-3 Test Mode page 44
Game PCB Assy
Link Connector
Hex head screws
(M8x20)
Joint plate
4.
Fit the Joint Plate to each Cabinet using 4off hex head screw (M8x20)