![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v/ridge-racer-v_operators-manual_704720051.webp)
Page 50
6-3-3-3 Switch Test
1.
Select Switch Test on the I/O menu screen to test the switches.
The following screen is displayed.
2.
The display shows the current state of the switches.
3.
Press the Up Select switch and the Enter switch together to EXIT and return
to the I/O menu screen
(a)
Not Used
(b to f)
Display will change from OFF to ON each time a switch is operated.
(g)
Numbers increase when the steering is turned to the right and
decrease when turned to the left. Right OK and Left OK is displayed
just before the steering wheel is turned to its full extent. Centre is
displayed when the steering wheel is in the central position.
.
(h)
Numbers increase when the accelerator pedal is pressed, and OK is
displayed just before the pedal reaches its full travel.
(i)
Numbers increase when the brake pedal is pressed, and OK is
displayed just before the pedal reaches its full travel.
(j,k,l)
The display will change from OFF to ON each time the switch is
operated.
Note:
If Left OK or Right OK is not displayed when the steering is turned
or OK is not displayed when the pedals are pressed reinitialize the
game. (see section 7 page 56)
I / O TEST
DIP SW
1234 [ON : RED]
LINK
ON
LINK AS
1 (LEFT)
SWITCH
TEST
COIN 0
SERVICE OFF
TEST ON
UP SELECT
OFF
DOWN SELECT
OFF
ENTER OFF
STEERING
+000 RIGHT OK
GAS
000 OK
BRAKE
000 OK
DOWN SHIFT
OFF
UP SHIFT
OFF
VIEW CHANGE
OFF
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)