![background image](http://html1.mh-extra.com/html/namco/ridge-racer-v/ridge-racer-v_operators-manual_704720063.webp)
Page 62
8-3
Replacing the Steering PCB and/or Fuse
1.
Remove 2off upper button head screws (M4x20), slacken 2off lower button head
screws (M4x20) and remove the Monitor Rear Panel.
2.
Replace the Fuse or:
3.
Disconnect all the connectors from the Steering PCB.
4.
Remove 4off button head screws (M4x10), and nylon spacer, and remove the
Steering PCB.
5.
Reassemble in reverse order.
Monitor
Steering PCB
Fuse
Button head screw
(M4x10)
Button head screw
(M4x10)