M095.x
1 of 6
3330 Dixie-Narco Blvd.
Williston, SC 29853
www.dixienarco.com
M095.0
Energy Star Evaporator Fan Motor Sub-Assembly
276E HVV
06/10/09
Safety Precautions!
•
Please read these instructions in their entirety before proceeding.
•
Ensure that the Electrical Power is disconnected from the Vending Machine by removing Vending
Machine Power Cord from the wall outlet.
•
Remember use caution working with the Refrigeration Unit parts. These parts may have sharp edges and
corners.
•
Failure to comply with these instructions could result in injury or electrical shock, which can be serious
or fatal.
Models affected:
All Pepsi HVV 276E-Model Venders
Produced Beginning Production Run 6757DZ and higher.
Reason:
To Provide Step-by-Step Instructions for the
removal of the current Evaporator Fan Shroud Assembly
and installation of the new Energy Star Evaporator Fan
Shroud Assembly. This kit is designed to be installed in
venders with factory installed Environmental Control Kits
and SBC (Single Board Controller) E Model electronics.
Additional information for the Environmental Control
Assembly (631,004,00x.x4) can be obtained from
Instruction E013.x or contact your Dixie-Narco
Representative or the Technical Service Department.
