![NAMCO CRISIS ZONE DX Operator'S Manual Download Page 56](http://html1.mh-extra.com/html/namco/crisis-zone-dx/crisis-zone-dx_operators-manual_3163040056.webp)
Page 55
9.
Aim the gun at the cross mark in the bottom left corner of the screen, and
pull the trigger. After the trigger is pulled the screen will revert to the original
Gun Test screen
10. On the original Gun Test screen, check that the gun can aim at any area
inside the edges of the screen.
If the gun sighting is not correct, repeat the above procedure.
11. Turn the Test Switch OFF to return to normal game Mode.
Use the following guidline when adjusting the line of sight.
Align the upper edge of both the front and rear gun sight with the horizontal
line of the cross on the screen.
Align the centre of both the front and rear gun sights with the vertical line of
the cross on the screen.
AIM AT CENTER OF THE CROSS
AND PULL GUN TRIGGER
Front gun sight
Rear gun sight
Cross on screen
Summary of Contents for CRISIS ZONE DX
Page 83: ...Page 82 1 13 14 5 9 7 6 10 8 17 18 15 4 2 16 3 12 11...
Page 88: ......