Page 41
4-3
Fitting the Joint Box
1.
When the Monitor Cabinet is in its final installation position, lower the four (4)
Level Adjusters with a spanner so that all castors are raised from the floor by
approx 5mm. Tighten the lock nuts with a spanner to ensure that the Level
Adjusters do not move.
Note: If the location site of this game has a polished floor, it is recommended that
rubber pads are fitted under the Level Adjuisters to prevent the game sliding on
the floor when in use.
Adjustable Foot
Castor
Approx. 5mm
Monitor Cabinet
2.
Remove 6off security screw (M5x15), undo the lock and remove the Join Box
Cover from the Joint Box.
Security screw
(M5x15)
Joint Box Cover
Joint Box
Monitor Cabinet
Hex head screw
(M8x20)
Joint Box
Level Adjuster
Hook
here
Security screw
(M5x15)
Hex head screw
(M8x20)
Summary of Contents for CRISIS ZONE DX
Page 83: ...Page 82 1 13 14 5 9 7 6 10 8 17 18 15 4 2 16 3 12 11...
Page 88: ......
