Page 32
3-2
Removing the Header Assy
The Header assy has a forward centre of gravity, so it is important that at least two (2)
people are used to remove or fit the Header assy.
The fitting position of the Header Assy is very high, and it is important that a means of
reaching the height safely, without stretching, is available, (e.g. steps step stool etc.).
1.
2.
Remove 2off button head screws (M5x15) and remove the Connector Cover.
3.
Disconnect the connector.
4.
Remove 2off hex head screws (M5x35) and slide the Header Assy forward
slightly to disengage the Header Assy from the Rear Retaining brackets.
5.
Lift the Header Assy off from the top of the Monitor Cabinet.
Header Assy
Hex head screw
(M5 x 35)
Hex head screw
(M5 x 35)
Header rear
retaining bracket
Header rear
retaining bracket
Button head screw
(M5 x15)
Connector
Connector cover
Summary of Contents for CRISIS ZONE DX
Page 83: ...Page 82 1 13 14 5 9 7 6 10 8 17 18 15 4 2 16 3 12 11...
Page 88: ......
