Page 135
14.
Reassemble in reverse order.
•
During reassembly, ensure that all connectors are securely connected.
•
During reassembly, ensure that a lithium based grease is applied to
the pusher shaft.
•
During reassembly, ensure that the gap (approx. 1mm) between the
Panel Assy and Playfield Assy is the same on the left and right sides
before tightening the screws.
•
During reassembly, adjust the gap (approx. 1mm) between the pusher
table and pillar stages (L), (R) to be the same on the left and right sides
to prevent coins falling into the gap.
Stage side cover (L)
FS side plate L
Panel Assy
Elongated adjustment hole
FS side plate R
Stage side cover (R)
Pusher table
Phillips screw
(M4 x 8) x 3
Phillips screw
(M4 x 8) x 3
1mm
1mm
•
How to adjust the gap to 1mm
1.
Remove 3off phillips screws (M4x8), and remove the FS side plates (L), (R).
2.
Adjust the gap to 1mm by using the elongated screw holes in the stage side
covers (L), (R).
Summary of Contents for CASINO WINNER
