Page 129
5.
Loosen the 2off double point screws (M4x8), and remove the pusher crank.
6.
Remove 4off phillips screws (M4x12), and replace the Pusher Motor.
7.
Reassemble in reverse order.
•
During reassembly, make sure that the connectors are securely
connected.
•
When reassembling, ensure that the double point screws are installed
at a right angle to the flat section on the motor shaft, and apply loctite
242 to the threads before installation.
•
During reassembly, ensure that the end of the motor shaft is flush with
the pusher crank end face.
•
During reassembly, observe the bearing on the pusher crank by
looking through the inspection hole in the pusher table.
Pusher crank
Double-point screw (M4 x 8) x 2
Phillips truss screw (M4 x 12)
Flat section on motor shaft
Pusher motor
Bearing on pusher crank
Inspection hole in the pusher table
Summary of Contents for CASINO WINNER
